Vision Spinner 3

The authentic Vision Spinner 3 is designed with all your favorite features of a 510-threaded pen style device: slim form factor, variable voltage dial, and simple single-button functionality. The upgraded V Chip in the Spinner 3 adds several improvements over previous Spinner devices, including fast USB-C charging, a 0.8 ohm minimum resistance and the brand new 5W pre-heat button.

Looking for a simple, reliable device to use with coils over 1.0 ohm? The Vision Spinner 3 attaches easily to any 510-threaded tank and will fire coils between 0.8 ohms and 3.2 ohms. The single firing button can be used to activate your coil or will turn your Spinner 3 on and off with five clicks in under 1.5 seconds. The additional pre-heat button at the base of your Spinner 3 device will push 5W of power through your coil to warm up your eliquid and is ideal for preheating thicker eliquids before you take a vape.

To charge your Vision Spinner 3, just plug in the attached USB-C cord to your device and to a compatible wall adapter (no higher than 5V/2A). With an appropriate wall adapter the Spinner 3 can charge to full in as little as 90 minutes, though charging time will vary based on your adapter. With a 1600mAh built-in battery, the Spinner 3 can last all day with light to medium usage.

In addition to faster charging, the Spinner 3’s upgraded V Chip also outfits the device with several standard protections, including overcharge and short-circuit protections as well as an 8-second overheat protection that will cut off the device after 10 seconds of constant firing. The LED light on your battery will indicate low resistance and low voltage statuses as well as displaying your charge status.

Vision Spinner 3 Includes:

(1) Vision Spinner 3 Device

(1) USB-C Charger

(1) User Manual

Vision Spinner 3 Features:

- Updated V Chip

- 510 Threading to Tank

- Voltage Output from 3.2V - 4.8V

- 4 Power Level Output: 3.3V, 3.8V, 4.3V, 4.8V

- 0.8 ohm Minimum Resistance

- Bottom Dial for Voltage Settings

- 5-Click On/Off

- Single Firing Button

- Pre-heating Button (5W Output)

- 8 Second Overheat Protection with 10 Second Cutoff

- Overcharge Protection

- Short Circuit Protection

- LED Battery Life Indicator

- USB Type-C Charging Port

Vision Spinner 3 Specifications:

Size: 100mm x 19mm

Weight: 86g

Threading: 510

Battery Capacity: 1600mAh

Output Voltage: 3.3V - 4.8V

Supported Resistance: 0.8 ohm - 3.2 ohm

Charging: USB-C Port