Efest LUC V2 Battery Charger

The Efest LUC V2 Battery Charger is an intelligent 2-bay battery charger for your 18650 batteries. With a 1000mA (1A) charging output and digital LCD display so you can see the current charge of your vape batteries, the LUC V2 helps make sure your batteries are ready to use when you need them.

The Efest LUC V2 can charge two batteries independently at the same time and features two charging modes, 0.5A and 1A, which you can switch between using the button at the bottom of the charger. The LCD screen displays your current charging mode, an accurate voltage readout for each battery, and the charging information for each independent channel, letting you know exactly how much charge remains in your batteries.

Compatible with most Li-ion (ICR/IMR/INR) and LiMn batteries, from your newer 21700 batteries and tried and true 18650 battery cells, all the way down to the smaller 16340 batteries. With charged batteries inserted, the LUC V2 can even be used as a power bank to charge smart phones, tablets and gaming devices with its included USB output port.

This charger is compatible with the following Li-ion battery sizes: 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 26650, 26500

(1) Efest LUC V2 Battery Charger

(1) Wall Charger Cable

(1) Car Charger Cable

(1) User Manual

- Charges 2 batteries simultaneously

- Two charging modes: 0.5A, 1A

- LCD display shows precise battery voltage and selected charging current

- Automatic detection of battery status and charging mode selection

- Each slot charges independently and displays charging status/current voltage of each battery

- Over-discharge protection

- Over-voltage protection

- Short circuit protection

- Reverse polarity protection

- Charging stops automatically when batteries reach 4.2V

- Charging will restart if inserted batteries drop below 4.1V

- Activation function - the LUC V2 can reactivate batteries at > 0.6V

- USB port for charging electronic devices (fully charged battery cells must be installed)

- 3 year Manufacturer’s Warranty

Input: AC 100V-240V 50/60Hz or DC 12V

Output: 4.2V +/-.05V

Output Current: 0.5A or 1A